RoboClaw 2x7A Controller per Motori

125,00 

COD: roboclaw-2x7a-motor-controller Categoria:

Descrizione

Il RoboClaw è un driver per motori a spazzole che offre una corrente in modalità continuativa sino a 7.5 per canale e correnti di picco sino a 15A! Risulta essere un ottimo controller per motori DC di media potenza, indispensabile in tutti i progetti di robotica mobile!

The RoboClaw motor controllers from Orion Robotics can control a pair of brushed DC motors using serial, RC, or analog inputs. The integrated dual quadrature encoders make it easy to create a closed-loop speed control system, or analog feedback as position control. This version can supply a continuous current of 7.5A per channel (15A peak).

The RoboClaw from Orion Robotics (formerly Basic Micro) is an efficient, versatile, dual-channel synchronous regenerative motor controller. It can supply two brushed DC motors with 5 A, 15 A, 30 A, or 60A continuous (depending on the model) at voltages from 6 to 34 V, and it allows for peak currents up to twice the maximum continuous rating.
The RoboClaw features dual quadrature decoding capability. A built-in PID routine can be used for closed-loop speed control, maintaining motor speeds even if the load varies and to read from encoder pulses.

Several interface modes are supported by the RoboClaw: it can be controlled via TTL serial for use with an embedded system or a PC with a serial adapter, RC hobby servo pulses for use as an RC-controlled electronic speed control (ESC), or analog voltages for use with potentiometers or analog joysticks.

Specifications:

Size:2 .1″ × 2.9″ × 0.9″
Weight: 60 g
Motor channels: 2
Control interface: USB; non-inverted TTL serial (2-way); RC servo pulses; analog voltage
Minimum operating voltage: 6 V
Maximum operating voltage: 34 V
Continuous output current per channel: 7.5 A
Peak output current per channel: 15 A

Features:

Simple bidirectional control of two brushed DC motors
6 V to 34 V operating supply range
7.5 A to 60 A maximum continuous current output, depending on controller model
Automatic current limiting reduces duty cycle when motor current is between 1× and 2× the controller’s rated current
Four communication or control options:
1.USB serial interface (virtual COM port)
2.Logic-level (TTL) serial interface for direct connection to microcontrollers or other embedded controllers
3.Hobby radio control (RC) pulse width interface for direct connection to an RC receiver or RC servo controller
4. 0-2 V (5 V tolerant) analog voltage interface for direct connection to potentiometers and analog joysticks
Dual feedback inputs for PID closed-loop control:
1.Speed control with quadrature encoders, up to 19.6 million encoder pulses per second
2.Position control with analog encoders or potentiometers
3.(Open-loop control with no feedback also available)
Screw terminals for quick connect/disconnect
Configurable via pushbutton interface
Regenerative braking
Tolerates high-speed direction changes
Jumper-selectable 5 V BEC
Battery monitoring and under-voltage cutoff protects batteries from over-discharging

Recensioni

Ancora non ci sono recensioni.

Recensisci per primo “RoboClaw 2x7A Controller per Motori”

Il tuo indirizzo email non sarà pubblicato. I campi obbligatori sono contrassegnati *