Shield Xbee per Arduino e compatibili

10,50 

COD: arduino-xbee-sensor-shield Categorie: ,

Descrizione

Shield per Xbee compatibile con Arduino, Leonardo, Carduino e schede simili.
Particolarmente utile perché offre la possibilità di selezionare due livelli di tensione diversi (5V e 3.3V) a seconda del tipo di dispositivo da utilizzare e permette di operare con un modulo XBee senza perdere tutte le altre interfacce di Arduino!

This XBee Sensor Shield not only keep the original advantages of V5.0, but also increases the bluetooth Xbee encapsulation, WIFI and Xbee communication module interface and it is compatible with Arduino UNO, Arduino Duemilanove and Arduino LEONARDO controllers.
One of the most important features is that the shield add 5V/3.3V power switch function so you can use it with devices which require lower voltage input by simply change a jumper position.

The XBee Sensor Shield adopted digital and analog interface with servo motor line extanding, I2C interface, 32-channels servo controller interface (digital D0, D1) bluetooth module and communication interface, the TF card module communication interface, APC220 wireless RF module communication interface, 12864 LCD serial interface.

With this shield, you can use XBEE modules and all the other digital/analog interfaces at the same time.

Specifications:

3.Output Voltage:5.5V/9V-12V
4.Product Compatibility:UNO, DUE, R3, LEONARDO and all the sensors in store.
5.Dimensions: 56mm x 56mm

Interfaces:

1.D:Digital signal interface
2.A:Analog signal interface
3.V/+:VCC
4.G/-:GND
5.Others:APC220, Bluetooth, SPI,XBee,I2C, LCD1286

Recensioni

Ancora non ci sono recensioni.

Mostra solo le recensioni in Italiano (0)

Recensisci per primo “Shield Xbee per Arduino e compatibili”

Il tuo indirizzo email non sarà pubblicato. I campi obbligatori sono contrassegnati *